Pallet furniture: make a pallet sofa

And our darling, PALLET OR PALLETS, arrived in a post that you asked for a lot. Learn how to make a pallet sofa with back! The decor of your room looks beautiful with pallet furniture and you just have to adapt the project to make a sofa with more or less seats, always based on your need and the size of your room!

Using pallets in the decoration is a very cheap way to leave a warm and pleasant environment. One of the most popular pallet furniture is the pallet sofa and we will teach you how to do it. A pallet sofa is very pleasant in environments with a classic, modern, rustic style. Because the sofa will not do the decoration alone, it always depends on the other components of the environment.

Pallet furniture: learn to make a sofa

To make this specific model, you will need:

6 Pallets - You can buy already sanded or pan in stocks, constructions or transport companies
Coarse sandpaper
Nails, Screws
Drill and Hammer
Nuts and bolts
Varnish
Paint (optional, if you want to paint the sofa or leave it in the color of wood)
Futtons, cushions or mattresses for the seat
Step by Step 1:
Take the six pallets, wash and sand. All corners and edges should be sanded very well and left more rounded for the sofa to be more beautiful. Then remove two or three plates from the middle part of the pallet that we will use as a base and keep for later use.

Walk through 2:

Take the pallet you removed from the wood and nail it with another one, complete with all the wood.

Note that the top pallet has the bottom without wood, but the top part has all the wood.

Step by Step 3:

With the parts that you separated at the beginning, place around the top pallet, so that you hold the cushions on top of the furniture. You can sand to give the necessary finish and use screws, nuts or metal "L's" to fix. That is, you need to cover the gaps in the top pallet. And also put wood on the sides, but it is optional, just so the cushions do not fall.

Walk through 4:

For the backrest, you must take another pallet and disassemble, leaving as shown in the figure below. Remove the wood until you get the same formation as the photos. See the second photo below to get more sense. Each pallet can have different formats, so it is important that you follow the model and leave the model of your pallet in the same way as in the tutorial.

Footsteps 5:

For the backrest, you must fit between the slats at a slight angle. If necessary, sand the angle you want. Use a few more slats to give the necessary support so that your pallet is secure.

Then, just place the pillows or futon and your sofa will be ready. You can make it bigger or smaller if you want!

Pallet furniture: make a pallet sofa